Clean carpet, hard floor, ceramic, tile, VCT, linoleum, marble, stone, and more with one machine! 30% less water consumption. Self cleaning brushes no messy disc pads. Whisper quiet.
The Bostitch SX1838K 18GA Narrow Crown Finish Stapler is designed for the professional driving 7/32 In. narrow crown staples from 1/2 In. to 1-1/2 In. in length. Along with our other small-body finish tools, this tool is made with lightweight magnesium and has a tough new industrial design. The oil-free engine requires no maintenance and prevents stains on work surfaces, while the swivel air fitting with filtered air inlet increases maneuverability and improves engine durability.
Dry areas quickly with this compact, three-speed blower.
Quickly dry carpet, hard floors, fresh paint, concrete sealer and much more.
Ensure durability and many years of use with this blower's rotationally-molded body
The PortaJACK-PRO floor tightening jack is a professional tool offering a durable design capable of standing up to the rigors of daily use. Constructed of the best material available and designed with the professional installer in mind, it is a precision built tool that can deliver more than a ton of force and will provide you years of quality service. The PortaJACK-PRO floor tightening jack is designed to hold flooring strips tight and keep in place for nailing. Can also straighten crooked or bowed flooring strips and hold in the nailing position. It can apply more than a ton of force and provide the hold necessary to free the installer’s hands for nailing. The PortaJACK-PRO is designed as one tool that will both push or pull the flooring strips tight. With its removable shoe you can efficiently position the jack on the floor or in the field of flooring without damage to the floor
The 472 Portamatic S pneumatic flooring nailer is designed to staple ¾” thick wood flooring and includes a shoe pad for ½” wood flooring Designed to accept 1-1/ 2 or 2” 15 ga x ½” crown Flooring Staples. Operates at 70-90 PSI @ 3.5 cfm. A light tap of the mallet ensures the staple is set tight in the proper location every time for a wood floor that stays put. The Portamatic S is light weight; easy to use has an integrated safety to prevent accidental discharge. Porta-Nails 15ga. flooring staples are made of the finest materials and to provide superior holding power and will not let go. Porta-Nails are also available in stainless steel for ACQ treated materials. Cat # 47090 Wide Profile Shoe is available to position Portamatic TL in front of tongue to provide balance and protection for pre-finished flooring
The easy to use 461A Flooring Stapler is the fast and cost effective way to secure 1/ 4 In. to 5/8 In Engineered and Bamboo Wood Flooring, Today’s floors can present installation challenges due to the various dimensional profiles of the flooring. PNI’s commitment to provide solutions for the hardwood flooring installer is once again displayed with this easy to use Stapler that will adjust for various thicknesses and will accommodate three different lengths of fasteners. Bamboo and Engineered floors are easy to install and stay in place when stapled into proper sub floor systems. The 461A uses 1 In. to 1-9/16 In. 18 ga 1/4 In. crown staples. The 18 gauge staple provides superior holding power and its thin profile can help to prevent de-lamination of engineered flooring. The 461A’s adjustable shoe bases along with the adjustable Elevator Platform, for fine tuning the position of the staple, give you the versatility to obtain professional installation results with
The 421 Portamatic Pneumatic Floor Nailer is the most innovative and versatile air flooring tool on the market today.. The tool comes ready to nail 3/4 In. flooring and accessory pads and shoes, sold separately, allow for quick changes to handle 9/16, 33/32 In., Bamboo and 18mm Flooring. One tap with the mallet and your nail is set, tight and in the right spot! This is the only tool in the industry that allows you to add an accessory shoe to convert for Face Nailing and also includes a sturdy carrying case to protect your investment. Our blind nailing shoe is designed to protect the top surface of your floor and our oil-less operating system ensures no oil drops or stains from oil. A quick access gate and clip system allows you to clear a jam. The nail’s wide head and grapple barb design provides superior holding power! The 421 requires only the lightest tap to actuate and set the nail. The nailer is perfectly balanced as the tool rest on both the sub floor and the wood floor
The easy to use 402 Porta Nailer is the finest most versatile flooring nailer on the market and comes ready to angle nail 5/8, 3/4 and 33/32 In. thick tongue and groove flooring. The nailer will also nail 3/8 -9/16 In. floors, metric configurations including bamboo and can be converted for face nailing by changing accessory shoes (sold separately). PNI’s “Preferred-Seating" System uses an exclusive ratcheting ram to ensure nails are properly seated and flooring strips are tightly driven together. The patented “anti-split” nail cuts through wood without splitting your floor and three lengths of nails will insure you have the right fastener for the job. The nail’s wide head and grapple barb design provides superior holding power. Porta-Nailers are world-renowned by professionals and do-it yourselfers alike and are designed to protect today’s Pre Finished Surfaces and positions easily on your wood floor to insure proper nail placement. Made with
12" x 18" Orbital Polisher/refinisher allows the DIYer to do the jobs of a rotary polisher with ease! To be used with our polishing pads that can be purchased separately. Please click on the available options of pads we have below.
The SL8V2 floor sander combines tilt action sanding and a drum that runs at a slow constant speed to allow the DIYer or contractor to achieve professional results!
The SL8 floor sander combines tilt action sanding and a drum that runs at a slow constant speed to allow the DIYer to achieve professional results!
All- metal construction assures durability. All-steel triple planetary gearbox provides heavy duty yet quiet operation. Dual-trigger negative pressure switch allows operator to run with either hand. Turn a 13" machine into a 20" or any other combination, by removing 4 bolts. Exclusive "lockout lever" is designed so operator can safely activate motor with both hands on the grips. Wide- gripping handle locking mechanism gaurantees a tight lock and smooth adjustment. Non-marking PVC bumper prevents marks on walls and furniture